The Shuttle AK11 KT133A Based Motherboard
Too bad this isn't a DDR board!

By, Marco "BigWop" Chiappetta
July 19, 2001

The VIA KT133A has long been the darling of the Athlon overclocking community. With excellent performance, compatibility and stability, at a great price point, is there any question why?  With the recent reduction in DDR RAM prices and wide availability of motherboards based on DDR chipsets from VIA, ALi, AMD and SiS, many people are dismissing the KT133A when considering an upgrade.  For the most part, we'd agree with these people.  The price difference between DDR RAM and standard PC133 SDRAM is marginal, and most DDR capable motherboards are only slightly more expensive than similarly equipped non-DDR boards.  So why should you consider any KT133A based boards?  Well, we'll tell you why...

The KT133A has had a few months to mature.  The chipset Itself has been through a few revisions, there have been a slew of reference BIOS updates, and VIA's 4-in-1 drivers have also evolved quite a bit, and are now far better performing and more stable than earlier versions.  On top of these incremental improvements to the KT133A "platform", many companies have introduced high performing SDRAM modules capable of running at low CAS latencies with Front Side Bus speeds in excess of 150MHz.  A few sticks of this high-performance RAM, coupled with a quality KT133A based motherboard should result in an incredibly fast, stable, inexpensive system, that isn't plagued by the bugs and glitches usually associated with a newly introduced platform.

Today, we'll be taking a look at a KT133A based board from Shuttle, the AK11.  Shuttle has been producing quality boards targeted squarely at the OEM sector for years.  Because some of these older products lacked features that many do-it-yourselfers craved, Shuttle never gained a strong foothold in the enthusiast market.  Shuttle has broken with tradition with the AK11 though...let's put it through the wringer and see what we can find out...

Specifications / Features of the Shuttle AK11
Last of a Dying breed?

Click any Image for an Enlarged view...

VIA KT133A Chipset

  • Socket A
  • Supports AMD Athlon CPU up to 1.4G+
  • Supports AMD Duron CPU up to 900MHz+


  • VIA VT8363 North Bridge
  • VIA VTC82C686B South Bridge
  • 200/266MHz DDR host interface

Expansion Slot:

  • 1 x AGP (4x AGP)
  • 6 x PCI
  • 1 x CNR


  • 3 x DIMM
  • Supports up to 1.5GB of PC100/PC133

On board IDE Controller:

  • Supports PIO Mode 4 and DMA Mode
  • Supports Ultra ATA 33/66/100 UDMA
  • Transfer rate up to 100 MBytes/sec
On board I/O Controller:
  • 1 x Floppy port
  • 2 x Serial port (16550 fast UART compatible)
  • 1 x Multi-mode Parallel port (SPP, EPP, ECP port)
  • 2 x USB port

H/W Monitor:

  • 5 positive voltage
  • 3 temperature
  • 2 fan speed monitoring

Other features:

  • Onboard Audio
  • APM 1.2
  • ACPI 1.0
  • 2 Front Panel USB Connector Header(Optional)
  • 2 Fan Power Connector
  • CPU Voltage Auto Detection (CPU PnP)
  • Suspend to Ram
  • Supports PC99 Requirements
  • Supports AC Power Fail Resume
  • Supports H/W monitor function
  • Wake-On-Ring
  • Wake-On-Alarm

Form Factor:

  • ATX


Within the AK11's box, you'll fine a standard compliment of accessories.  A CD-ROM containing all of the necessary drivers needed to get your board up and running (VIA 4-in-1s and On-Board Audio drivers), a complete user's manual, an 80-Wire ATA/100 IDE cable and a standard floppy cable are all included.  One thing missing that we felt should have been included was a set of secondary USB connectors.


The Shuttle AK11 installed without incident.  The board complies to the standard ATX form factor, so it mounted perfectly into our mid-tower case.  There are a few jumpers on board that need to be set in order to configure your processor's multiplier and FSB (Front Side Bus) range, but other than that installation was painless.  Looking at the picture below, it is obvious Shuttle put much thought in to the AK11's layout...

This probably isn't the cleanest case you've ever seen, but it demonstrates something we feel is very important.  When a motherboard's connectors and components are well laid out, spending a few extra minutes routing and bundling cables will yield a very clean, uncluttered case.  An uncluttered case in turn allows for maximum airflow, which results in lower overall operating temperatures...and we all know how desirable lower temperatures are, especially when overclocking...


The BIOS, Layout and Quality